Product photo of 3D 500 ACA X-TRA CUT Compound

3D 500 ACA X-TRA CUT COMPOUND QUART

$55.00
$55.00
Skip to product information
Product photo of 3D 500 ACA X-TRA CUT Compound
  • Product photo of 3D 500 ACA X-TRA CUT Compound
  • 3D 500 ACA X-TRA CUT COMPOUND QUART
  • Product photo of 3D 500 ACA X-TRA CUT Compound
  • 3D 500 ACA X-TRA CUT COMPOUND QUART
3D 500 ACA X-TRA CUT COMPOUND QUART

3D 500 ACA X-TRA CUT COMPOUND QUART

$55.00
$55.00

Heavy-cut body-shop compound designed as a first correction step for sanding marks and deeper paint defects. Compatible with foam or wool pads and capable of removing P1000-grit sanding marks or finer when used correctly.


✓ Curated by Panthera Detailing Cars
✓ U.S.-based fulfillment
✓ Secure checkout

3D 500 ACA X-TRA CUT Compound

A heavy-cut correction compound designed as a first step for sanding marks, deeper scratches, oxidation, and water spots on fully cured automotive paint.

Why it stands out

  • Heavy-cut Step 1 correction product
  • Designed to remove P1000-grit sanding marks or finer
  • Compatible with foam or wool cutting pads
  • Useful before a finer polishing stage

Use appropriate machine-polishing technique, monitor paint condition, and refine afterward when additional clarity is required.
Best for
  • Heavy Paint Correction
  • Sanding Mark Removal
  • Deep Scratches
  • Oxidation
  • Water Spots
  • Body-Shop Compounding
How to use

1. Wash, decontaminate, and inspect the paint before machine correction.
2. Work on a cool surface and select a foam or wool cutting pad appropriate for the paint condition.
3. Apply a small amount of compound to the pad and spread it over a controlled working section.
4. Machine-polish the section using the tool and pad combination appropriate for the paint system.
5. Wipe away residue with a clean microfiber towel and inspect the correction result under proper lighting.
6. Repeat only as needed, monitoring paint condition and temperature.
7. Follow with a finer polishing step when additional clarity or finish refinement is required.
Product details

3D 500 ACA X-TRA CUT Compound is a Step 1 extra-cutting compound for body-shop and paint-correction work. It is designed to remove sanding marks, deeper scratches, oxidation, and water spots while leveling the paint surface before later refinement. The product can be paired with foam or wool cutting pads depending on the level of correction required.
Specifications

Product Type: Heavy-cut compound
Correction Stage: Step 1 / compounding
Abrasive Capability: Designed to remove P1000-grit sanding marks or finer
Primary Defects: Sanding marks, deeper scratches, oxidation, and water spots
Compatible Pads: Foam or wool cutting pads
Primary Surface: Fully cured automotive paint
Size: Quart
Care & Safety

Use only on fully cured paint and with appropriate machine-polishing technique. Inspect paint condition before correction and avoid excessive heat or repeated aggressive polishing in one area. Keep pads clean during use and stop if contamination builds up. Follow the product label and SDS for handling, protective equipment, and storage guidance.

You may also like